✦ FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one. Equipped with 2.4 Inch TFT display. Built-in rechargeable lithium battery.
✦ DSO-TC3 handheld oscilloscope, 10 MS/s sampling rate, 500 kHz bandwidth. It can be used freely for both periodic analog signals and aperiodic digital signals. Equipped with one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.
✦ DSO-TC3 transistor tester can identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors etc. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.
✦ DSO-TC3 transistor tester is suitable for pairing of transistors, identification of mixed surface mount, and preliminary screening of small batch components. "Mos Test" mode can test various types of transistors and test capacitance, resistance etc.
✦ Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement.
✦ Six waveforms: sine, square, pulse stroke, triangle, ramp and DC.
The device should be stored in a soft case, and the operating environment should be at a temperature of -5~40℃, and the relative humidity should not exceed 80%.
The device should be stored in a clean and dry place to avoid moisture, mold, heavy pressure, mechanical damage,humidity and direct sunlight.
Avoid using in the rain or fog, avoid dropping or shocking.
When the screen on the LCD does not light up, it indicates that the voltage is too low, and it needs to be charged in time.
The product specifications are subject to change without notice, allfinal interpretation rights were reserved by FNIRSI Technology Co., Ltd, All trademarks, product images,technical parameters are properties of FNIRSI Technology Co.. Ltd. All rights reserved.
30-Day return and refund guarantee (Refer to our Refund Policy), 2-year warranty (only available for orders purchased directly from fnirsi.com), lifetime technique support by FNIRSI.
Please feel free to reach us with any concerns:
Email: service@fnirsi.com / info@fnirsi.com
We strive to reply to you within 24 hours.
FNIRSI has started researching and development manufacturer of quality optical products including Golf rangefinder, laser,measure device and binoculars since 2016.
Focus on the development,researching, and manufacturing for over 8 years.
We are committed to delivering premium products and exceptional customer service, striving to be your most reliable and intelligent assistant.
At Fnirsi, we are committed to providing our customers with the best value for their purchases. To ensure you always get the best price, we offer a 30-day price guarantee on all products purchased directly from fnirsi.com. This policy aims to give you confidence and peace of mind when shopping with us.
Our 30-day price guarantee means that if you purchase a product from fnirsi.com and the price of that product drops within 30 days of your purchase date, you are eligible for a refund of the difference in price.
If you notice that the price of a product you purchased from fnirsi.com has dropped within 30 days, follow these steps to apply for a refund of the price difference:
At Fnirsi, we strive to provide our customers with high-quality products and exceptional customer service. Our 30-day price guarantee is just one of the ways we ensure you get the best value for your investment. Shop confidently with Fnirsi, knowing that you are always getting the best deal available.
Thank you for choosing Fnirsi. If you have any questions or need further assistance, please do not hesitate to contact our customer support team at info@fnirsi.com.
Very nice device 3 in one. A+++
1. Take an electrolytic capacitor (e. g. 100 μF) and test it on the component tester.
2. Connect a low Ohm resistor (5..10 Ohm) in SERIES to the same capacitor and test again.
On my TC3:
220 μF 63 V Samwha SD: 209.2 μF 0.08 Ohm.
The same capacitor + 8.98 Ohm 0.5% resistor: 211.3 μF 1.2 Ohm (!!!). How on Earth?
On an old ATmega based component tester:
The same capacitor itself: 206.1 μF 0.19 Ohm.
With the resistor: 208.0 μF 8.49 Ohm. Slightly low (the correct value should be around 9.1 Ohm), but still reasonably close to truth.
The resistor itself displays 9.0 Ohm on BOTH TC3 and the old tester.
Little Offset from in terms of Ampli & Freq in Generator Mode. Some minor issues in Part -detecting Mode. Scope Mode better than expected ( in terms of 3dB Bandwidth) !
Usable 4 Audio & Test of slow AD / DA systems.
Very good works excellent I will continue to buy from this seller Thank you
Thanks for subscribing!
This email has been registered!